30~1500KW Gas generator set Series

There are two ways to connect the diesel engine and generator, one is flexible connection, that is, using a coupling to connect the two parts, and the other is rigid connection, using high-strength bolts to connect the generator's rigid connection piece and the diesel engine flywheel disk. After connecting the diesel engine and generator, they are installed on a common chassis, and then equipped with various protective sensors, such as water temperature sensors. Through these sensors, "Visually display the operating status of the diesel engine to the operator, and with these sensors, it is possible to set an upper limit. When the limit value is reached or exceeded, the control system will give a warning in advance. At this time, if the operator does not take measures, the control system will automatically shut down the unit. This is how the diesel generator unit performs self-protection.". The sensor plays the role of receiving and feedback various information. The real display of these data and performing protection functions is the control system of the diesel generator set. The control panel is generally installed on the generator, known as a backpack type control panel, and some are independent screens placed in the operating room, known as a split type control panel. The control panel is connected to the generator and sensor through cables, respectively displaying electrical parameters and diesel engine operating parameters.