Steel Binding Barrels and Screws are include a barrel and a screw with an extra-wide (truss) head. They're Nickel plated to resist corrosion in wet environments. Barrel length and screw length are measured from under the head.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from stainless steel, they’re chemical resistant and may be mildly magnetic. Barrel length is measured from under the head. Drive Style Phillips/Slotted drives are one of the most common drives today. They align easily with the driver, withstand more torque than slotted drives, and fasten even if the driver is off angle. Tighten with a Phillips or JIS driver.

Fiberboard Nails with Phillips Drive Double Sink Head Wallboard Nails

Hold sheets of drywall together until glue sets. These screws have a sharp point that penetrates drywall and a curved neck that sinks in without tearing the paper surface. They're black-phosphate steel to resist corrosion in dry environments. Length is measured from the top of the head.

Open end blind rivets are tubular rivets with a mandrel through the center. The entire rivet assembly is inserted into a hole drilled through the parts to be joined, and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and snaps off the mandrel.
Rivet stocks an extensive inventory of open end blind rivets. We offer dome head open end rivets, large flange open end rivets, and 120° countersunk open end rivets in a range of sizes, materials, and lengths to meet your unique needs. We also offer closed end blind rivets.
Follow the links below to find the open end tubular rivets you need, or use the filters at left to narrow your search. Order open-end rivets today, request a quote or contact us for more information.

Square Weld Nuts are four sided square body nut fasteners with 4 projection at each corner of thesquare, for welding purpose. Metric Self Colour Steel Square Weld Nuts - DIN928. Available from UNIBRIDGE in A2 / 304 Stainless Steel and A4 / 316 Stainless Steel, or any other carbon steel materials, these high precision nuts can be purchased in thread sizes from M3 to M14.

Square Weld Nuts are four sided square body nut fasteners with 4 projection at each corner of thesquare, for welding purpose. Square weld nuts are also known by square projection weld nuts Square weld nut dimensions are defined in both metric and imperials sizes with unifed nationacoarse pitch (UNC), fine pitch (NF), fixed pitch (UN) and iso metric thread profile. These are produced across all material categories and astm specifications.

The turnbuckle is equipped with both left- and right-hand thread，are used for adjusting the tension or length of sopes, cables, rods, chains and other tensioning systems in constructions, machines, fencing etc. Galvanized steel turnbuckles are available with threads from M4 to M20 inclusive.

Eyebolts are made from higher tensile steel, and if screwed into the same strength material, would need only to engage for a length equal to that of a full nut. However, it is possible and even likely that the material they are screwed into will be considerably weaker. The screwed length is therefore extended to compensate. DIN 580 and BS 4278 British standards for fixed rings are similar, mainly used for lifting and connecting applications. This is a German standard for fixed rings, commonly used in lifting, fixing, and connecting applications. It has certain load-bearing capacity and safety factors, and has passed a series of tests to ensure its quality and reliability. In addition, different countries and regions may have other standards and specifications for fixed rings. If you need to choose a fixed ring for a specific application, it is recommended to consult with professional engineers or suppliers to obtain more detailed and accurate information.